How to Choose a Floor Drain: Outlet Size, Water Seal and Cover Type
Share
A floor drain is one of the cheapest items in a bathroom and one of the most annoying to replace. Four decisions determine whether the one you buy will work.
1. Outlet size
Match the drain to the pipe you already have: 50 mm for most domestic showers and bathrooms, 75 mm and 110 mm for commercial and balcony drainage. If you are replacing an existing drain, measure the pipe socket rather than the grate.
2. Water seal depth
The water seal is the column of water that blocks sewer gas. 50 mm is the common domestic standard; shallow 30–40 mm seals suit thin floor build-ups but dry out faster. In rooms that go unused for weeks, choose a drain with a replaceable anti-odor core rather than relying on the water seal alone.
3. Cover type
- Standard grate – cheapest, best flow, visible.
- Tile insert – takes a cut piece of the floor tile, so the drain disappears. Popular in large-format bathrooms. See tile-insert drains.
- Linear channel – for walk-in showers and big tiles, where a single point drain would need too much fall. See linear drains.
4. Material and finish
SS304 for wet rooms and commercial use, solid brass for premium fitted bathrooms, ABS or PVC for projects where cost drives the decision. Our 304 stainless steel range and brass range cover both ends of that scale.
Before you order
- Pipe diameter and depth of the floor build-up.
- Tile thickness if you want a tile-insert cover.
- Whether the room is used year round (water seal vs dry seal).
- Quantity, and whether you need OEM marking.
Send us those four points and we will quote the right drain rather than the closest one.